AMD : If the engine is making a ticking noise then most likely that the clearance is high and not low, therefore most likely thicker shims will need to be used, I cannot tell you exactly which shims are needed since they will vary depending on the current clearance, it will need to be measured. AMD : The valve clearance adjustments cost 3.4 hours of labor, so the actual dollar cost will vary based on the shop's hourly labor charge. AMD : If you leave it ticking not much is going to happen, you will not get the maximum fuel economy and performance out of the vehicle since the valves will not open all the way, but this is not something that you will easily notice. AMD : I do recommened you adjust the valves but they are not of absoulute importance. AMD : If you have any other questions please let me know. If you are satisfied with my answer please rate it so I can get compensated for my time. Thank you. 0 elantra valve clearance AMD : Hello and thank you for trusting us with your Hyundai question, My name is XXXXX XXXXX X will be assisting you today. AMD : Valve adjustments in your vehicle is done using shims, So depending on the clearance, if it's too high then a thicker shim will need to be installed to make the clearance smaller, if the clearance is too small or zero then a thinner shim will need to be installed to increase the clearance so in all cases shims will need to be used I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P Elm City, NC used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future. David L. Richmond, TX 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Lurch. Thank you very much. Thank you Geordie, I will not hesitate to contact justanswer in the future!ton, WV Another great insight to what may be the problem. I will Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
72-10 11sAqua 8s